What's inside

Gear Available in iRig Recorder 3

Below are all the models of gear included in iRig Recorder 3, plus all the gear models you can add to your rig through in-app purchase.

Waveform Editor

Adjust the start and end of your recording, then "crop" to keep only the selected portion or "cut" to delete the selection. You can also loop the selection.

Note that when you apply a edit to a recording, it does not overwrite the original recording. Instead, iRig Recorder creates a new file with the process applied. This way you don’t lose your original recordings.

Included in:

  • iRig Recorder
  • All Functionalities Bundle
Brighten Voice

The Brighten Voice processor optimally increases the high frequencies in your recordings. The STRENGTH slider determines how much brightness will be added to your audio – settings that are too high can make the audio sound harsh or strident, so be sure to set this control carefully. Select MALE or FEMALE depending on the gender of the speaker or singer to get the best performance from the processor. Move the slider to taste, and press the PREVIEW button to hear what the process does to your audio without actually changing your recording. When you are satisfied with the results or your settings, press APPLY to create a new recording file with the Brighten Voice process applied.

Included in:

  • iRig Recorder
  • All Functionalities Bundle
  • Processors Bundle
Cleanup

The Cleanup processor uses digital signal processing to reduce the amount of noise in your recordings. The STRENGTH slider determines how much noise will be removed from your audio – settings that are too high can also remove the important parts of your recording such as the actual speech or music, so be sure to set this control carefully. Move the slider to taste, and press the PREVIEW button to hear what the process does to your audio without actually changing your recording. When you are satisfied with the results or your settings, press APPLY to create a new recording file with the Optimize Tone process applied.

Included in:

  • iRig Recorder
  • All Functionalities Bundle
  • Processors Bundle
Optimize Tone

The Optimize Tone processor uses digital signal processing to equalize or “even out” the spectrum of your recordings for optimal tonality. Select whether your source recording contains speech or music by tapping the SPEECH or MUSIC buttons. If your recording is a mixture of speech and music, select MUSIC. The BALANCE slider determines the whether the processing will make your recording more warm (more bass frequencies) or more crisp (more treble frequencies). Move the slider to taste, and press the PREVIEW button to hear what the process does to your audio without actually changing your recording. When you are satisfied with the results or your settings, press APPLY to create a new recording file with the Optimize Tone process applied.

Included in:

  • iRig Recorder
  • All Functionalities Bundle
  • Processors Bundle
Optimize Volume

The Optimize Volume processor uses digital signal processing to set your recordings to the optimal level for both speech and music. Select whether your source recording contains speech or music by tapping the SPEECH or MUSIC buttons. If your recording is a mixture of speech and music, select MUSIC. The STRENGTH slider determines the percentage of optimization that will occur. The default is 90%, a good setting for most applications. Move the slider to the left for less of the optimization process; move it to the right for maximum volume optimization. Press the PREVIEW button to hear the Optimize Volume process without actually changing your recording. When you are satisfied with the results or your settings, press APPLY to create a new recording file with the Optimize Volume process applied.

Included in:

  • iRig Recorder (by registering)
  • iRig Recorder FREE (by registering)
  • iRig Recorder 3 for Android (by registering)
Pitch Shift

The Pitch Shift processor changes the pitch of your recorded audio either up or down. Move the slider to the left to lower the pitch or to the right to raise the pitch. The Pitch Shift amount is displayed in semitones (half steps, chromatic notes on a piano or single frets on a guitar). Press the PREVIEW button to hear what the process does to your audio without actually changing your recording. When you are satisfied with the results or your settings, press APPLY to create a new recording file with the Pitch Shift process applied.

Included in:

  • iRig Recorder
  • All Functionalities Bundle
  • Processors Bundle
Smooth Voice

The Smooth Voice processor takes the harshness out of your recordings. The STRENGTH slider determines how much of the smoothing effect will be added to your audio – settings that are too high can make the audio sound dark or dull, so be sure to set this control carefully. Select MALE or FEMALE depending on the gender of the speaker or singer to get the best performance from the processor. Move the slider to taste, and press the PREVIEW button to hear what the process does to your audio without actually changing your recording. When you are satisfied with the results or your settings, press APPLY to create a new recording file with the Smooth Voice process applied.

Included in:

  • iRig Recorder
  • All Functionalities Bundle
  • Processors Bundle
Speed Down

The Slow Down processor literally slows down the speed of your recordings but without changing the pitch. The SLOW DOWN slider determines how much you will slow down your recording. When the slider is all the way to the right (100%), your audio will play its normal speed. Move the slider to the left to slow down your audio to a maximum of 50% (half the original speed). Press the PREVIEW button to hear what the process does to your audio without actually changing your recording. When you are satisfied with the results or your settings, press APPLY to create a new recording file with the process applied.

Included in:

  • iRig Recorder
  • All Functionalities Bundle
  • Processors Bundle
Speed Up

The Speed Up processor literally speeds up the speed of your recordings but without changing the pitch. The SPEED UP slider determines how much you will slow down your recording. When the slider is all the way to the left (100%), your audio will play its normal speed. Move the slider to the right to speed up your audio to a maximum of 200% (double the original speed). Press the PREVIEW button to hear what the process does to your audio without actually changing your recording. When you are satisfied with the results or your settings, press APPLY to create a new recording file with the process applied.

Included in:

  • iRig Recorder
  • All Functionalities Bundle
  • Processors Bundle

Editing

Waveform Editor

Processing

Brighten Voice

Optimize Tone

Optimize Volume

Pitch Shift

Smooth Voice

Speed Down

Speed Up

*Legal detail

x
This site uses profiling cookies and third parties cookies. If you continue to navigate or close this banner, you consent to the cookies being used in accordance with our policy. To learn more or modify your cookies preferences, please read our Cookie Policy.

Please wait...

10% Complete (success)