IK Multimedia - iRig Acoustic Stage

Specs

iRig Acoustic Stage Specifications

Dedicated iRig Acoustic Microphone

Microphone Type: MEMS
Polar Pattern: omnidirectional
Frequency Response: 30 Hz - 20 kHz, +/-3dB
Max SPL: 130dB SPL
Signal-to-Noise Ratio: 101 dBA
Maximum soundboard thickness: 4mm / 0.16"

Connections

Dedicated iRig Acoustic Microphone Input: 2.5mm / 3/32" TS mono jack
AUX Instrument Input Connector: 6.3mm / 1/4" TS mono jack
AUX Instrument Input Impedance: 1 MOhms
Analog Output Connector: 6.3mm / 1/4" TS mono jack, line-level, low impedance
Analog Output Impedance: 50 Ohms (can drive long cables without any loss)
Digital Output Connector: micro-USB

DSP/Interface

AD and DA Resolution: 32-bit
Sampling Rate: 48 kHz
Interface Output: USB class compliant audio output via micro-USB port
Power: battery power (2xAA), USB bus power
Battery Life: approximatively 12 hours of continuous usage with alkaline batteries and 15 hours with rechargeable high quality Ni-MH AA cells (2000 mAh and up)

Package includes

iRig Acoustic Stage DSP/interface
iDedicated iRig Acoustic microphone
iBelt clip
iCarrying case
i2 x 1.5V AA Battery

Dimensions

DSP/Interface size: 101mm/3.98" x 72.3mm/2.85" x 23mm/0.91" (belt clip excluded)
DSP/Interface weight: 99g/3.49oz (batteries excluded)
Microphone size: 31.7mm/1.25" x 32.2mm/1.27" x 18.8mm/0.74"
Microphone weight: 20g/0.71oz
Microphone cable length: 150cm/59.1"

Compatibility

iRig Acoustic Stage can be connected to any amplifier, mixer or PA system using a 6.3mm / 1/4" TS mono jack cable.

iRig Acoustic Stage can also be used as USB recording interface for Mac/PC, iOS, Android.

Computers

Mac®: Mac OS X 10.6 or later. One free USB port. A USB to Micro-USB cable (sold separately) is required.

Windows®: Fully supports Windows 10 WASAPI for low latency audio. One free USB port. (ASIO4ALL is required on Windows 7 and 8 for low latency audio. See our FAQ here for further details.) A USB to Micro-USB cable (sold separately) is required.

iOS Devices

Compatible with iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (9.7-inch), iPad Pro (12.9-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad 4th generation, iPad mini. iOS 6.0 or later is required.

A USB to Micro-USB cable (sold separately) and a Lightning to USB Camera Adaptor (sold separately) are required.

Also compatible with all newer iPhone, iPad and iPod touch models.