Specs

iRig Mic HD 2

  • Microphone Type: condenser, electret
  • Capsule Size: 0.55"
  • Polar Pattern: cardioid
  • Interface Type: USB digital microphone with a built-in low-noise, high-definition preamp
  • Conversion: 24-bit A/D, 24-bit D/A
  • Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
  • Frequency Response: 20 Hz - 20 kHz, -3 dB
  • Maximum Sound Pressure: 125 dB
  • Sensitivity: -40 dB, 10 mV/Pa
  • Windscreen: built-in
  • Sensitivity: adjustable over a 40 dB range
  • Controls: Built-in low profile input gain and headphone volume contols/li>
  • Metering: Built-in multicolor LED for status and audio level indication
  • Connector Type: standard Micro-USB
  • Headphones Output: 1/8" TRS jack
  • Power: powered by connected device

iKlip Grip Pro

  • Holds any iPhone and smartphone model with screens ranging in size from 3.5" to 6" with case on
  • Works with DSLR and Digital Cameras, Field Recorders and devices compatible with standard UNC 1/4"-20 thread
  • Standard UNC 1/4"-20 threaded ball mount
  • 360° rotation and 90° adjustable holder angle
  • Includes integrated/detachable Bluetooth shutter controller
  • Material: Thermoplastic / Aluminum
  • Maximum weight applicable: 1kg / 35.2oz
iKlip bracket open close

Package includes

  • iRig Mic HD 2 microphone
  • Lightning to micro-USB cable
  • micro-USB-OTG to micro-USB cable
  • USB-C to micro-USB cable
  • Mic clamp
  • 5/8" to 3/8" thread adapter
  • Table top stand
  • iKlip Grip Pro bracket
  • iKlip Grip Pro handle / tripod / extender
  • Remote Bluetooth shutter
  • Lanyard
  • 10" LED ring light

Dimensions

iRig Mic HD 2

  • Size: 188mm/7.4" x 49mm/1.93"
  • Weight: 325g/11.46oz
  • Cable lenght: 60cm/23.6"

iKlip Grip Pro

  • Holding bracket width: 54mm (min) - 91mm (max) / 2.13" (min) - 3.58" (max)
  • Height: 19cm / 7.4" when folded (without holding bracket)
  • Extends up to 62cm / 24.4"
  • Weight: 200gr / 7.05oz

Compatibility

iRig Mic HD 2

iOS Devices

Compatible with iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (12.9-inch) 1st Generation, iPad Pro (9.7-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 4th generation. iOS 6 or later is required.

Also compatible with all newer iPhone, iPad and iPod touch models.

Computers

Mac®: macOS® 10.6 or later. One free USB port.

Windows®: Fully supports Windows 10 WASAPI for low latency audio. One free USB port. (ASIO4ALL is required on Windows 7 and 8 for low latency audio. See our FAQ here for further details.)

Android Devices

Compatible with Android devices running Android 5 or later and with USB digital audio capabilities.

iKlip Grip Pro

Compatible with any iPhone, iPod touch and Smartphone model with screens ranging in size from 3.5” to 6” with case on. Works with Digital Cameras, Field Recorders and devices compatible with standard UNC 1/4”-20 thread.

Legal detail | Warranty

x

We use cookies and other tracking technologies to improve your browsing experience on our site, show personalized content and targeted ads, analyze site traffic, and understand where our audience is coming from. To find out more or to opt-out, please read our Cookie Policy. To learn more, please read our Privacy Policy.

By choosing I Accept, you consent to our use of cookies and other tracking technologies.

 

I Accept

Please wait...

10% Complete (success)