Specs

iLoud Sub Specifications

  • Type: Ultra-compact studio-quality subwoofer with automatic setup, alignment, and room calibration
  • Driver: 6.5" high-performance aluminum woofer
  • Acoustic design: DSP-tuned with 2 x 6.5" aluminum passive radiators
  • Amplifier type: High-efficiency Class-D
  • Total power: 160 W RMS power, 200 W peak
  • Frequency response: 25 - 150 Hz @-6 dB
  • Crossover Type: Digital
  • Crossover frequency range: 50 Hz - 150 Hz
  • Max SPL at 40 Hz: 106 dB peak
  • Analog input sensitivity: -4 dBu signal generates 90 dB SPL @1 m
  • Maximum analog output level: 13 dBu = 0 dBFS
  • Connectors: 2 x XLR and 2 x RCA analog inputs, 2 x XLR and 2 x RCA analog outputs, 1 x USB, 1 x power socket
  • Supported Bluetooth® audio codec: SBC, AAC
  • Supported USB audio input sample rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
  • Full DSP control
  • Calibration: Built-in ARC room correction for both subwoofer and satellite speakers
  • Output Latency: 1.42 ms
  • Control software: ARC X for macOS and Windows
  • Power requirement: 100 to 240 V AC, auto-ranging, 50 or 60 Hz, 5 A max
  • Operating temperature (non-condensing): from 0 to 45 °C
  • Operating altitude: up to 2000 m

Dimensions

  • Dimension (H x W x D): 24.4 cm/9.61" x 25 cm/9.84" x 28.3 cm/11.14"
  • Weight: 7.1 kg/15.6 lbs.

Package includes

  • 1x iLoud Sub
  • 1x Power cord
  • 1x USB cable
  • ARC Microphone with clamp

System Requirements

ARC X

Mac® (64-bits)

  • Minimal: Apple M1 or Intel® Core i5 Processor, 4 GB of RAM, macOS® 10.15 or newer (macOS 11 or newer required for Apple Silicon Processors).
  • Supported Plug-in formats: Audio Units, VST 3, AAX.
  • Works with any audio interface with a phantom powered XLR microphone input and a pair of outputs for monitoring.
  • 44.1 kHz or 48 kHz sampling rate is required for the measurement process.

Windows® (64-bits)

  • Minimal: Intel® Core i5 Processor or equivalent, 4 GB of RAM, Windows 10 (64 bit) or newer.
  • Supported Plug-in formats: VST 3, AAX.
  • Works with any audio interface with ASIO drivers, a phantom powered XLR microphone input and a pair of outputs for monitoring.
  • 44.1kHz or 48kHz sampling rate is required for the measurement process.

Requires an OpenGL 2 compatible graphics adapter.

*Legal detail | Warranty

SPECIAL OFFERS11 THIS MONTH
x

We use cookies and other tracking technologies to improve your browsing experience on our site, show personalized content and targeted ads, analyze site traffic, and understand where our audience is coming from. To find out more or to opt-out, please read our Cookie Policy. To learn more, please read our Privacy Policy.

Click below to consent to our use of cookies and other tracking technologies, make granular choices or deny your consent.

 

Accept All Manage Settings

Deny All

Loading...