What's inside

Gear Available in Ampeg SVX

Below are all the models of gear included in Ampeg SVX, plus all the gear models you can add to your rig through AmpliTube Custom Shop.

Dynamic 57
Based on Shure® SM57™
This model has a flatter frequency response than the other dynamic mics. This mic is highly regarded as a guitar mic and used widely in studios all over the world.
Dynamic 20
Based on Electro-Voice® RE20™
5
This mic model recreates a smooth reaction across a wide spectrum of frequencies, especially attractive in the low area. This means that the Dynamic 20 is a great selection for acoustic and electric bass.
Vintage Dynamic 20
Based on AKG® D20™
5
A vintage dynamic large diaphragm microphone that used to be the standard mic for bass amps and kick drums during the 60’s. It’s warm and present, and has a smooth roll-off at high frequencies.
Dynamic 421
Based on Sennheiser® MD421
5
Probably the second most popular dynamic mic to use on guitar amps, this model provides a equally pleasing sound, but is a warmer than the 57.
Condenser 87
Based on Neumann® U87
This is a model of one of the most popular large diaphragm mics ever. It can be found in any large recording studios mic locker. Because of it’s excellent frequency response curve, the 87 has become the go to mic when needing a clean, flattering sound.
Condenser 414
Based on AKG® C414
The Condenser 414 is modeled after another highly regarded large diaphragm condenser microphone. It is a bright, open microphone that will flatter big full tones and will also blend beautifully when combined with another cabinet/mic setup.
BA-500
Officially Certified Ampeg® BA500® Model
25
The BA-500 is a high quality solid-state bass amp, with a sonic fingerprint that will deliver a big and detailed sound in any musical situation. Thanks to its powerful preamp sound shaping controls, this amp model will be great on all musical genres and styles. Its natural cabinet match is the BA-500 cabinet, but you can get interesting sounds experimenting with all the included cabs options.
SCP-OD Overdrive
Officially Certified Ampeg® SCP-OD Overdrive® Model
25
This virtual stomp effect emulates the Ampeg SCP-OD Overdrive pedal. It recreates the original distortion circuit, adding upper octave harmonic content to the direct signal and creating as a result a unique overdrive effect.
SCP-OCT Octaver
Officially Certified Ampeg® SCP-OCT Octaver® Model
25
This stomp effect is modeled after the Ampeg SPC-OCT Octaver pedal. Moving the octave knob will double your direct signal one octave below the direct signal. In this way you can make your melodic lines richer and fuller, expanding the frequency range.
Analog Chorus
Analog Chorus effect
25
A model of a classic analog Chorus/Vibrato unit provides both analog Chorus and analog Vibrato effects. When in Chorus mode the modulation will be lush and slow. When in Vibrato effect the modulation will be faster and more noticeable.
Analog Delay
Analog Delay effect
15
This model is based on a classic analog delay with modulation stomp pedal.
Bass Wah
Bass Wah effect
15
This effect is modeled after the classic Wah pedal used by many of the top players from the 60’s and 70’s. The "auto" option will produce the Wah effect automatically, meaning that there is no need for the manual intervention on the pedal position.
Compressor
Compressor effect
25
This effect is modeled after a vintage compression stomp pedal and can deliver a strong sustain and powerful compression with lots of character.
Envelope Filter
Envelope Filter effect
25
This stomp is a highly developed filter effect. Essentially, it uses the envelope of the incoming signal to control a synthesizer style filter. The sound palette’s range of this virtual unit is wide and rich. You can enhance your bass tone adding from simple auto Wah effects to extreme filtering effects.
Volume
Volume Pedal
10
This model is a traditional volume pedal.
B-15R
Officially Certified Ampeg® B-15R® Portaflex “Flip Top” Model
25
This is the 1960’s classic bass amplifier, enhanced and improved for the actual musical scenario. This all-tube model limited production features the Ampeg “classic” tube preamp combined with a selectable tube 60W/100W power amplifier. This option gives you the most sought-after vintage bass sound ever. In addition, if you want to get that unmistakable 60s tone; match it with the B-15R cabinet.
SVT-CLASSIC
Officially Certified Ampeg® SVT-CLASSIC® Model
25
This is the authentic and classic Ampeg tube sound. This all-tube bass head delivers a warm, harmonically rich and punchy sound that is a trademark for the rock bass sound, both live and in the studio. The SVT-Classic is the amp that created the rock bass sound. Its natural speaker match is the SVT-810E or the SVT-410H.
SVT-4PRO
Officially Certified Ampeg® SVT-4PRO® Model
25
This is a real all-round high end bass amplifier. It combines a fully featured tube preamp that can really cover any sound need with a tight solid state power amplifier. The SVT-4PRO sound spectrum is wide and rich. You can get from extremely neutral and transparent sounds to powerful unique tones. Experiment with the SVT-4PRO settings and create your own custom sounds.
B-15R
Officially Certified Ampeg® B-15R® Portaflex “Flip Top” Cab Model
10
BA-500
Officially Certified Ampeg® BA500® Cab Model
10
BXT-410H
Officially Certified Ampeg® BXT 410H® Cab Model
10
PB-212H
Officially Certified Ampeg® PB-212H® Cab Model
10
SVT-410H
Officially Certified Ampeg® SVT-410H® Cab Model
10
SVT-810E
Officially Certified Ampeg® SV-T810E® Cab Model
10

Stomp

SCP-OD Overdrive

SCP-OCT Octaver

Analog Chorus

Analog Delay

Bass Wah

Compressor

Envelope Filter

Amp

SVT-CLASSIC

SVT-4PRO

Cab

BXT-410H

SVT-410H

SVT-810E

Mic

Dynamic 57

Dynamic 20

Vintage Dynamic 20

Dynamic 421

Condenser 87

Condenser 414

*Legal detail

Please wait...

10% Complete (success)